What is the main configuration of the brushless motor winding machine for driving the motor
Most automation equipment is equipped with a drive motor, and so is the motor winding machine. Many friends say that the winding machine is produced by themselves, but they are not wrong. The motor winding machine produces the motor. So, how to configure a reasonable drive motor for the winding machine?
Let's illustrate with a brushless motor winding machine! I hope it can be helpful to everyone!
1. Flyfork type external winding machine, commonly used for aircraft models, drones, and other external winding motor stator series. For some general stators, the difficulty is not high and there are not many requirements for precise wiring. A stepper motor can be used as the driving motor, but since the requirements are not very high, it is sufficient. Of course, the price will be much cheaper. If the winding accuracy requirement is relatively high, or if a non-standard customized external winding machine is required, it is recommended to use a servo motor drive, so that the machine will be more stable and the winding effect will be better.
2. Needle type inner winding machine, often suitable for inner winding series stators such as water pumps, household appliances, and electric tools. Compared to outer wound products, inner wound products have higher precision and more complex winding, especially for stators such as electric toothbrush motors and hair dryer motors, which only have a diameter of 10-20mm. More precise driving methods are needed to ensure the stability of product winding
Where does the winding machine require a motor?
1. The spindle motor is mainly used to drive the movements of the spindle, screw, etc., and is an important component.
2. Transmission motor, mainly used for X-axis, Y-axis and other displacement movements.
3. Indexing motor, mainly used for indexing during mold winding, with the stator rotating one position, winding one slot, and then rotating another position.
The brushless motor winding machine needs to be equipped with the necessary drive, transmission, and indexing motors according to the customer's needs, of course, this is based on ensuring that the machine can operate normally.
